18970 MINT SV ELK PC
Multipoint lock, self-locking, electric coupling, panic C
Product profile
For main and side entrance doors with electrically controlled lever handle operation in residential and commercial buildings. The panic C function with split lock follower and separated lever handle control (outside/inside) offers the ideal combination of access control and escape route. Access is controlled via an identification system (e.g. badge) or the cylinder.
Standard version
- Split 3-part lock follower; square 9 mm
- Self-locking with sequence control and latch blocking
- Electrically couplable external lever handle
- Emergency opening via the cylinder (forced locking function)
- Panic C: panic side reversible inwards/outwards
- Monitoring contacts: lever handle L/R, deadbolt and door status, cylinder integrated
- Method of operation: standby/operating current via DIP switch
- Opening impulse protected against tampering: DIP switch on/off
- Connection cable (not in scope of supply): 12-pin; 10/20m; 0.14mm2
- Operating voltage: 12/24 V DC ±15%; 100/50 mA
- Inputs: 12/24 V DC at GND
- Outputs: potential free; loading capacity 30 V DC/100 mA
- Three hardened deadbolts; 20 mm throw
- Slider protection: mechanical top/bottom
- Dampened, reversible DIN L/R comfort latch
- Suitable for rotary knob cylinders
- Follower turning angle 35°
Important note
The cylinder screw is not centred in the forend. To determine the cylinder lengths: centre of forend = centre of lock cylinder.
Do not use a reduction sleeve for the Follower/square spindle.
No external, mechanical bolt-switch contact is recommended.
Only use the 5920 HESO panic-spindle.
Mount lever handles rotatably-fixed on plates/rosettes (easyfix®)!
EN14846: set 11105 MS required!
c
Ä
v
Y
a
p
Downloads
Product information
Product data sheetInstructions & diagrams
Wiring diagramProduct code
