Skip to main content

18972HZ MINT SV ELK BK

Multi-point locking, self-locking, electrically couplable on both sides

Product profile
​Multi-point lock with U-shaped forend, feedback contacts, integrated self-locking, latch blocking and sequence control. For applications with controlled handle operation in commercial construction, especially for museums, banks, schools, universities and police & court buildings with high-security doors. The lever handles L / R can be electrically separated, either permanently engaged or disengaged. Entry and exit are controlled via an identification system (e.g. badge). Both lever handles are temporarily engaged or disengaged at the same time (emergency opening) via the held cylinder.
Standard version
  • ​Solid 20 mm bolt on secondary boxes (20 kN)
  • Feedback contacts, self-locking, sequence control and latch blocking
  • 3-part, split lock follower; square, 9 mm
  • Electrically disconnectable lever handle L or R on both sides
  • Emergency opening via cylinder (positive closing function)
  • Monitoring contacts: Handle L/R, bolt and door status, cylinder integrated
  • Operating mode: idle/working current Handle L/R can be switched over separately (DIP switch)
  • Opening impulse permanently protected against manipulation
  • Operating voltage: 12/24 V DC ±15%; 200/100 mA
  • Inputs: 12/24 V DC to GND
  • Outputs: load capacity 30 V DC / 100 mA
  • Slide fuse: top/bottom mechanical
  • Damped, DIN L/R convertible comfort latch
  • Suitable for rotary knob cylinders​
Important note
​​Cylinder screw is not in the centre of the forend. To determine the cylinder lengths: Centre of forend = centre of lock cylinder.
No reduction sleeves are permitted for the lock follower/mandrel.
Only use internal bolt switching contact.
Only use the 5920/59105 HESO panic square spindle.
Keep lever handle on escutcheons/rosettes for rotation (easyfix®)!
Tamper protection according to EN14846: Set 11105 MS required!
v
Y
a
q

Downloads

Product information

Product data sheet

Technical documentation

Dimensional drawing CAD Daten 2D

Families and products overview

Overview of striking plates

Instructions & diagrams

Mounting instructions Wiring diagram

Approvals & Certificates

Certificates
Product code
Product Note
​*Permanent renovation U-shaped forend for 19000 HZ-lock VB incl. drill protection

Your access to expert advice

Contact Glutz partners for expert advice

Our Glutz partners are here to give you the help and advice you need.

Contact Glutz for expert advice

We’re here to give you the help and advice you need.