Skip to main content

18970HZ MINT SV ELK PC

Multiple locking, self-locking, electrically couplable, panic C

Product profile
​Multi-point lock with U-shaped forend, feedback contacts, integrated self-locking, latch blocking and sequence control. For main and side entrance doors with electrically controlled lever handle operation in residential / commercial construction and police & court buildings with high-security doors. The Panic C function with split lock follower and separate lever handle control (outside/inside) offers the ideal combination of access control & escape route. Access is controlled via an ID-system (e.g. badge) or the cylinder.
Standard version
  • ​Solid 20 mm bolt on secondary boxes (20kN)
  • 3-part, split lock follower; 4-ct. 9 mm
  • Electrically couplable outside handle
  • Emergency opening via cylinder (forced closing function)
  • Panic C: Panic side can be changed in/out
  • Monitoring contacts: lever handle L/R, bolt and door status, cylinder integrated
  • Operating mode: idle/working current can be changed over (DIP switch)
  • Opening impulse protected against manipulation: can be switched on/off (DIP switch)
  • Operating voltage: 12/24 V DC ±15%; 100/50 mA
  • Inputs: 12/24 V DC to GND
  • Outputs: potential-free; load capacity 30 V DC / 100 mA
  • Slide lock: top/bottom mechanical
  • Damped, DIN L/R convertible comfort latch
  • ​Suitable for rotary knob cylinders
  • Follower turning angle 35°​
Important note
​​Cylinder screw is not in the centre of the forend. To determine the cylinder lengths: Centre of forend = centre of lock cylinder.
No reduction sleeves are permitted for the lock follower/mandrel.
Only use internal bolt switching contact.
Only use the 5920/59105 HESO panic square spindle.
Keep lever handle on escutcheons/rosettes for rotation (easyfix®)!
Tamper protection according to EN14846: Set 11105 MS required!
c
Ä
v
Y
a
q

Downloads

Product information

Product data sheet

Technical documentation

Dimensional drawing CAD Daten 2D

Families and products overview

Overview of striking plates

Instructions & diagrams

Mounting instructions Wiring diagram

Approvals & Certificates

Certificates Declaration of performance
Product code
Product Note
​*Permanent renovation U-shaped forend for 19000 HZ-lock VB incl. drill protection

Your access to expert advice

Contact Glutz partners for expert advice

Our Glutz partners are here to give you the help and advice you need.

Contact Glutz for expert advice

We’re here to give you the help and advice you need.