Skip to main content

12430 SV PC

Mortice lock, self-locking, panic C

New
Product profile
​For external doors where unauthorised opening from the outside must be prevented. The outside lever handle is always in idle function. The key must be turned to the end stop in the opening direction, only then is the follower engaged and the door can be opened using the lever handle. After removing the key, the lever handle is switched back to idle. The panic function makes it possible to exit from the panic side at any time.
Used in commercial buildings (administration buildings) or secondary locking doors (e.g. server rooms).
Product profile
  • ​Self-locking lock with integrated sequence control and panic C function (closing force function)
  • ​Centred lock case
  • 20 mm deadbolt ejector​
  • ​Quiet closing due to the comfort latch and dampened deadbolt and  latch throw
  • Lever handle bearing with no backlash due to the two-part split  clamp follower
  • Linear lever handle operation and holding up torque
  • Reversible due to the reversible DIN L/R latch
  • Panic function reversible inwards/outwards
  • Follower turning angle 32°​
Important note
​Suitable for rotary knob and free-wheel cylinders
​Reducing bushes must not be used for the lock follower/spindle
External, mechanical bolt-switch contacts are not recommended​
​Use only the 5920/59105 HESO panic square pin.
The handles must be mounted rotatable-fixed on plates/roses (easyfix®).​
c
Ä
v
i
P

Downloads

Product information

Product data sheet

Technical documentation

Dimensional drawing CAD Daten 2D

Families and products overview

Overview of striking plates

Instructions & diagrams

Mounting instructions

Approvals & Certificates

Certificates Declaration of performance
Product code

Your access to expert advice

Contact Glutz partners for expert advice

Our Glutz partners are here to give you the help and advice you need.

Contact Glutz for expert advice

We’re here to give you the help and advice you need.